Introduction The new E>GO naviceiver generation sticks out with a truly comprehensive feature set and state of the art functionality. Therefore this web page is also detailed and comprehensive, to show you as much info about the this particular product line. We suggest that you read this web content to acquaint yourself with the ZE-NC3810, to learn about the seamless integration with your vehicle, that this unit is capable of. If you already know this product and the related web page and just want to look up something in particular, then please use this table of contents with the quick links below: The GPS-navigation with TMC and TMC Pro Connecting USB and iPhone/iPod E>GO naviceiver - 100 % custom-fitNavigation, entertainment, communication – the ZE-NC3810 naviceiver is a complex navigation and multimedia system with a large range of features. ZENEC‘s new top-of-the-line model fits together visually with FORD Mondeo, Focus and S-Max. The red button illumination and the customized design of the front panel makes the E>GO not only perfect for the respective look of the car interior, but the E>GO is also effortlessly integrated into the existing automotive electronics. ZE-NC3810 can be installed into the original dash board of the above named automobiles without further modifications and without any additional adapters: simply take out the factory radio, put in the E>GO and drive off. Even the connection of the factory-made steering wheel remote control is no problem: simply connect the E>GO to the existing plug – the functionality of the factory installed components is preserved. ZENEC E>GO – ingeniously easy, visually perfect.The general featuresWhen it comes to the top-of-the-line naviceiver equipment, all wishes have been fulfilled: The built-in CD/DVD drive plays all the current A/V formats. The electrical and mechanical anti-shock system provides for perfect image and sound fidelity during the ride. In addition to an RDS tuner for the best radio reception, the ZE-NC3810 is also equipped with an integrated digital power amplifier (4 x 50 watts) and a Dolby digital decoder. The E>GO has a USB-Port and a SD/SDHC card reader so music, movies, multimedia files or photos can be easily played back. The card slot is easily accessible on the front and is useable for SD and SDHC cards up to 8 GB of memory. The perfect integration
Factory-installed steering wheel remote controls stay fully functional with E>GO: The A/V functions of the E>GOs are connected to the steering wheel remote control via Interface with the FORD CAN-Bus. Each A/V source (radio, MP3, USB, etc.) including the hands-free function can be easily operated – ex factory - via the steering wheel remote control. The main GUISimple and totally straightforward operation has been one of the most critical points taken into account when this naviceiver line up was developed. The graphic user interface (GUI) is well structured and for best usuability, it has been separated in two main GUI start pages. The often cited “intuitive operation” has a really new meaning when it comes to the ZE-NC3810.
The Bluetooth interfaceThe ZE-NC3810 is equipped with an advanced CK5050+ Bluetooth system from Parrot. This makes playing music from a mobile phone and making phone calls in the car as simple as child‘s play. Make phone calls and play music from your mobile phone: ZENECs Naviceiver let's you easily establish and use a connection to a Bluetooth enabled mobile, offering a wide variety of optimized Bluetooth protocols. You do not need any installation kits, fixtures, cables, or even additional speakers in the vehicle‘s interior. Audio streaming
In addition to the hands-free application, audio files from a mobile phone can be managed via touchscreen (audio streaming via A2DP with AVRCP-profile) on the Naviceiver and played back in superb quality through the car‘s speakers. Convenient hands-free talkingThe new Parrot Bluetooth module marks an improvement in mobile communication: advanced signal processing technology, the so called Parrot Beamforming, is provided through a multi-directional, freely positionable microphone which is easily attached to the A-column. With this technology, all surrounding noises and echo effects are eliminated so that the voice is clearer. In cases where an externally mounted microphone is no option, an internal microphone is provided as well. Hands-Free during the drive – the caller number, phone book entries and other information is clearly shown on the ZE-NC3810 display. The address book of the naviceiver is automatically synchronized with the mobile phone. The Parrot module enables an alphanumeric sorting of phone book entries with an additional search function – a feature that guarantees ease in finding phone book entries, especially for professional use. Additional Bluetooth features
Always up-to-dateThe Bluetooth component firmware from ZE-NC3810 can be conveniently updated using a USB stick or SD card, for example if you would like to use a new mobile phone model or business phone in the car. The palette of compatible mobile telephones can be expanded at any time – with the ZE-NC3810 you are always up-to-date. The GPS navigationNavigate unerringly via touchscreen in all of western and eastern Europe – with its integrated navigation system, the naviceiver ZE-NC3810 reliably shows you the way in more than 43 countries. Due to the 400 MHz CPU (128 MB SD RAM) and the customized Nav-Engine software iGO8, the route calculation is very fast. Searching the destinationEnter the desired destination thereby choosing between the various destination and route entries – through address, ZIP/postal code, POI, saved/last found destinations. etc. – and you are ready to go. Your electronic copilot guides you to your destination without detours and shows you, if you so wish, relevant points such as gas stations, hotels, restaurants, parking lots, etc. Map displayUnmistakable navigation is ensured through a clear graphic map display, where various scales and view modes are available in 2-D and 3-D, as well as precise voice guidance (in 28 languages) and an easily understandable GUI display (also in 28 languages). The automatic zoom at intersections or traffic circles makes sure that there is no confusion even at difficult locations. Tunnel mode and lane assistant plus the 3-D landscape or 3-D city map views (with buildings, places of interest, and city maps) simplify the navigation just as well as the highway split screen mode with real signpost rendering (the display of signs in real-time on the map). Splitscreen modeA special feature deployed is the so called split screen mode. Whatever source you are listening to, like radio or music from other audio sources: with the touch of one finger you can activate the split screen mode to see turn arrow and distance information in the right hand pane of the main screen, to never miss an exit or a crossing. TMC and TMC ProThe ZE-NC3810 comes with a TMC and TMC Pro (optional and only in Germany available) receiver. The TMC function keeps you up to date regarding potential traffic jams on the chosen route to destination, while automatic re-calculation of a suitable detour is a function covered as well. Just select the respective TMC function in the control menu and you are also being shown all relevant traffic control message information on your map screen directly.
To activate the TMC Pro service of the ZE-NC3810 naviceiver, you have two options at hand: 1) Buy a prepaid activation card at your authorized ZENEC dealer, the item is called ZE-NC-TMCPRO, or else 2) buy and download the license directly over Naviextras with your credit card. Map updates via Naviextras
Naviextras is the online Portal for map updates and additional features for ZENEC naviceiver models and external ZENEC navigation devices. In the PDF below you can find important information on the Naviextras services:
Conneting USB and iPhone/iPod
Especially practical: USB-Port with iPod connection and plug 3.5 mm A/V port are in the included, very compact media-link box. With the help of this box (1.5 m cable extension), which can be easily placed in the center console or in the glove compartment, you can quickly connect and disconnect additional components.
iPod and iPhone can be connected to the media link box with the adapter cable ZE-NC-IPS (available separately). The connection using the USB high speed bus not only allows for quick access to all files, but also the control of videos via the naviceiver touchscreen. Naturally the iPod and iPhone are being charged during playback. E>GO compatible carsThe ZE-NC3810 fits to the following cars.
∗ The ZE-NC3810 is compatible with all derivatives of existing models such as ST, RS, Coupe or Convertible respectively. In addition, please note as follows:
Extend your E>GOZENEC All-In-One - this does not mean only full compatibility to all popular audio and video formats, but also the easy integration of further ZENEC devices like DVB-T tuner, rear view cameras or monitors for perfect rear zone entertainment.
E>GO features overviewThe integrated DVD/CD/MP3/WMA player
The integrated LCD monitor
The RDS-tuner
The GPS-Navigationssystem
The A/V-connections
The additional features
|
|||||||||||||||||||||||
 |
 |
 |  | | | | | | | | |
