ZE-RCE4606 – Rear View Camera for utility vehicles from MERCEDES & VW

ZENEC‘s rear view camera ZE-RCE4606 replaces the original third brake light of your MERCEDES Sprinter II, Sprinter III or VW Crafter.
Of course, you don ́t have to do without the third brake light. The ZENEC camera module takes over the original brake light, for simple „Plug & Play“ retrofit connecting to the vehicle-mounted cable.
An integrated microphone and an IR-LED night illumination system are part of the ZE-RCE4606 cam as well.
This product is compatible with a wide variety of 2-DIN A/V receivers of the aftermarket and the ZENEC E>GO product line up, including ZENEC 2-DIN infotainers and naviceivers.

Key Features

  • Compact, high-resolution rear view camera for MERCEDES Sprinter II, Sprinter III and VW Crafter vehicles
  • Easy “Plug & Play“ installation
  • Integrated microphone
  • LDR controlled day / night mode with 6 night vision IR-LEDs
  • Manual adjustment of vertical image section in 3 steps
  • Separable 3-part system cable, with cable lengths of 0.7 m + 15 m + 0.7 m

Technical Specifications

Image device 1/3“ / 8.5 mm Sony CCD Sensor
Lens focal length f2.6
TV system NTSC / 60 Hz
View angle 120° (D) x 102° (H) x 77° (V)
Native sensor resolution 752 (H) x 494 (V) pixels
Resolution of video-out > 600 TV lines
Frame rate 60 fields/sec
Signal to noise ratio > 48 dB
Light sensitivity 0.1 Lux, 0 Lux if IR on
Video output 1.0 Vp-p, 75 ohms CVBS
White balance Auto
Backlight compensation Auto
Gamma correction 0.45
Gain control Auto
Sync system Auto
Power supply DC 12 V
Current consumption 150 mA (DC 12 V) / ≤ 1800 mW
IP protection rating IP68
Operating temperature -20° C ~ +70° C

Mounting Instructions

Compatible to the following vehicles:

Model Type Model Year
MERCEDES Sprinter II W906 2006 > 2018
MERCEDES Sprinter III VS30 2018 >
VW Crafter LT3, 1st Gen 2006 > 2018