ZE-RVSC175 – twin-sensor rear view camera specifically for motorhomes
ZENEC‘s double lens reversing camera ZE-RVSC175 has been specially developed for partially and fully integrated motorhomes.
The compact ZE-RVSC175 has two camera modules with different focal lengths optimized for the respective field of view. Cam1 at the top of the camera housing is the “digital rear-view mirror“ offering a straight view back on the traffic situation. Cam2 located in the lower part of the housing features 100° viewing angle tilted downward for clear view behind and close proximity to the vehicle – for reversing and maneuvering.
ZENEC‘s ZE-RVSC175 is equipped with the latest PC3089D CMOS sensors, which ensure high image resolution and contrast. Cam2 features LDR controlled IR LEDs, ensuring good illumination of the area behind the vehicle at dusk and night.
Equipped with a 3-part separable system cable with a main cable length of 17 meters, this ZENEC reversing camera model can be installed in many motorhomes. The cam is mounted to the vehicle by the M16 hollow thread on the cam backside. The 16 mm drill for the wall breakthrough is included in the set.
The ZE-RVSC175 is compatible with monitors and 1-DIN or 2-DIN moniceivers, naviceivers and infotainers that support connection and control of two camera systems.
Key features
- Compact and elegant twin-sensor rear view camera
- Cam1 sensor with 45° and Cam2 sensor with 100° horizontal view angle
- IR-LED night-illumination system for Cam2 with dynamic LDR brightness control
- High quality CMOS picture sensor with low power consumption
- Detailed high contrast picture under twilight conditions
- Plastic injection main housing with M16 threaded hollow bolt for mounting
- Separable 3-part system cable with 17.0 m main cable length
Specifications
Image device | ⅓" / 8.5 mm PC3089D CMOS sensor |
Lens focal length Cam1 / Cam2 | f6.0 / f2.25 |
View angle (horiz.) Cam1 / Cam2 | 45° / 100° |
TV system | NTSC / 60 fps |
Sensor resolution | 728(H) x 488(V) pixels |
Native sensor resolution (SOC) | 732(H) x 504(V) pixels |
Resolution of video-out signal | > 550 TV lines |
Frame rate | 60 fields/sec. |
Signal to noise ratio | > 46.5 dB |
Light sensitivity | 0.4 Lux Cam1; 0.0 Lux Cam2 IR-ON |
Video output | 1.0 Vp-p (+/-0.2 V), 75 ohms, CVBS |
White balance | auto |
Backlight compensation | auto |
Dynamic range | 60,7 dB |
Gain control | auto |
Synchronization | auto |
Power supply | DC 12V (9.0-16.0 V DC) |
Current consumption (@DC12V) | 40mA Cam1 + 80 mA Cam2 / 1440 mW |
IP protection rating | IP68 |
Operating temperature | -20°C~+70°C |