Adaptor sets for pre-routed main cables
Camera adapter sets suitable for selected ZENEC cameras and the factory pre-routed main cable for various motorhomes, e.g. ADRIA, BÜRSTNER, CARTHAGO, DETHLEFFS, HOBBY, HYMER, PÖSSL etc.
The uppermost three camera adapter sets are suitable for the current ZENEC single camera models fitted mini 4-pin connectors (e.g. ZE-RCE3701-MK2-S, ZE-RVC82MT) and the new multi-view camera models which also deploy mini 4-pin connectors (ZE-RCE3703MV, ZE-RVC150MV, ZE-RVC80MV).
The four N-ZER adapter sets further down below are model-specific sets, suitable for individual ZENEC cameras.
The camera adapter sets simplify camera installation and connection immensely, as they directly adapt to the factory pre-routed main cable in the motorhome.
Z-EACC-CADIF
Cable adapter set for ZENEC cameras – for motorhomes and campervans with factory pre-routed CAMOS 6-Pin camera cable.
For CAMOS 6-Pin camera cable (with threaded lock screw) and direct connection of ZENEC camera models fitted with Mini 4-Pin connector (m) camera side and Mini 4-Pin (f) RCA/power adapter infotainers/moniceivers/naviceivers with rear view camera video input, or ZENEC multi-view input.
Compatibility campervans
Z-EACC-CADIF for CAMOS camera cable: e.g. for HYMER and ADRIA motorhomes and in ADRIA campervans
Compatibility ZENEC camera models
- ZE-RVSC62-MK2
- ZE-RCE3701-MK2-S
- ZE-RVC82MT
- ZE-RCE3703MV
- ZE-RVC150MV
- ZE-RVC80MV
References
Since the various ZENEC cameras have different equipment features (e.g. with Mic, without Mic or Multiview), the monitor side is adapted to Mini 4-Pin, so that the Power/Cinch cable end-piece contained in the camera set content can be used.
The adapters are intentionally designed as Y-version (red/black) with 2 x Mini 4-Pin plug and socket, so that the adapters can also cover new dual sensor camera models in the future.
Due to the pre-routed 6-Pin system cable, only red is fully assigned for MV and MIC with power and video, the black one is purely for power and video signal.
Cable adapter set
Z-EACC-DODIF
Cable adapter set for ZENEC cameras – for campervans with factory pre-routed DOMETIC CAM 35 6-Pin camera cable.
For DOMETIC CAM 35 6-Pin camera cable (connector without threaded lock screw) and direct connection of ZENEC camera models fitted with Mini 4 PIN plug (m) camera side and Mini 4-Pin (f) RCA/power adapter infotainers/moniceivers/naviceivers with rear camera video input, or ZENEC multi-view input.
Compatibility campervans
Z-EACC-DODIF for DOMETIC CAM 35 camera cable: e.g. for POESSL, CLEVER, GLOBECAR, ROADCAR, MALIBU, HOBBY campervans
Compatibility ZENEC camera models
- ZE-RCE3701-MK2-S
- ZE-RVC82MT
- ZE-RCE3703MV
- ZE-RVC150MV
- ZE-RVC80MV
References
Since the various ZENEC cameras have different equipment features (e.g. with Mic, without Mic or Multiview), the monitor side is adapted to Mini 4-Pin, so that the Power/Cinch cable end-piece contained in the camera set content can be used.
The adapters are intentionally designed as Y-version (red/black) with 2 x Mini 4-Pin plug and socket, so that the adapters can also cover new dual sensor camera models in the future.
Due to the pre-routed 6-Pin system cable, only red is fully assigned for MV and MIC with power and video, the black one is purely for power and video signal.
Cable adapter set
Z-EACC-DWDIF
Cable adapter set for ZENEC cameras – for motorhomes with factory pre-routed DOMETIC 6-Pin camera cable.
For DOMETIC camera cable (gray cable with threaded lock screw) and direct connection of ZENEC camera models with Mini 4-Pin connector (m) on camera side and Mini 4-Pin (f) RCA/power adapter to infotainers/
moniceivers/naviceivers with rear view camera video input, or ZENEC multi-view input.
Compatibility motorhomes
Z-EACC-DWDIF for DOMETIC camera cable (grey): e.g. for DETHLEFFS, BÜRSTNER, HOBBY, CARTHAGO, MALIBU motorhomes
Compatibility ZENEC camera models
- ZE-RCE3701-MK2-S
- ZE-RVC82MT
- ZE-RCE3703MV
- ZE-RVC150MV
- ZE-RVC80MV
References
Since the various ZENEC cameras have different equipment features (e.g. with Mic, without Mic or Multiview), the monitor side is adapted to Mini 4-Pin, so that the Power/Cinch cable end-piece contained in the camera set content can be used.
The adapters are intentionally designed as Y-version (red/black) with 2 x Mini 4-Pin plug and socket, so that the adapters can also cover new dual sensor camera models in the future.
Due to the pre-routed 6-Pin system cable, only red is fully assigned for MV and MIC with power and video, the black one is purely for power and video signal.
Cable adapter set
N-ZERCE3704S-CM
CAMOS cable adapter set for pre-routed camera cable for ZENEC ZE-RCE3704-2S
- Cable adapter for the ZE-RCE3704-2S dual lens camera for campervans with factory pre-routed CAMOS 6-PIN camera main cable
- The N-ZERCE37042S-CM adapter cable set allows the direct connection of the ZENEC ZE-RCE3704-2S camera to a suitable moni-/naviceiver (supporting two camera video signals) to a CAMOS system cable with 6-pin screw collar connectors pre-routed in the motorhome at the factory.
Compatibility campervans
For ADRIA campervans with factory pre-routed CAMOS 6-PIN camera main cable.
Compatibility ZENEC camera models
- ZE-RCE3704-2S
Cable adapter set
N-ZERVSC200-CM
ZENEC N-ZERVSC200-CM – Cable adapter set for pre-routed CAMOS camera cables
Adapter cable set for the connection of a ZENEC camera (ZE-RVSC200, ZE-RVSC200-MK2 + ZE-RVSC175) and a moni/naviceiver (with cinch inputs for rear view cameras) to a CAMOS 6-pin system cable with screw terminals which is pre-routed in the vehicle.
Compatibility motorhomes
The N-ZERSVC200-CM set for CAMOS system cable fits current ADRIA and HYMER motorhomes that have a camera preparation ex works.
Compatibility ZENEC camera models
- ZE-RVSC200-MK2
- ZE-RVSC200
- ZE-RVSC175
Cable adapter set
N-ZERVSC90-CM
ZENEC N-ZERVSC90-CM Cable adapter set for CAMOS 6-pin system cable
Adapter cable set for connecting the Zenec camera ZE-RVSC90 and a moni/naviceiver (with cinch inputs for rear view cameras) to a CAMOS 6-pin system cable with screw terminals pre-routed in the vehicle.
Compatibility motorhomes
The N-ZERVSC90-CM set for CAMOS 6-pin system cable fits the current motorhomes from Adria and HYMER.
Compatibility ZENEC camera models
- ZE-RVSC90
Cable adapter set
N-ZERVSC175-CM
ZENEC N-ZERVSC175-WD – Cable adapter set for pre-routed DOMETIC camera cables
Adapter cable set for connecting a ZENEC camera (ZE-RVSC200-MK2, ZE-RVSC200 + ZE- RVSC175) and a moni/naviceiver (with cinch inputs for reversing cameras) to a DOMETIC 6-pin system cable with screw connections which has been pre-laid in the vehicle.
Compatibility motorhomes
The set N-ZERVSC175-WD for DOMETIC camera cable (grey) fits e.g. DETHLEFFS, BÜRSTNER, HOBBY, CARTHAGO and MALIBU motorhomes.
Compatibility ZENEC camera models
- ZE-RVSC200-MK2
- ZE-RVSC200
- ZE-RVSC175
Cable adapter set
