ZE-RVC82MT – Rear view camera for cars and motorhomes

The ZE-RVC82MT rear view camera from ZENEC was designed for universal use in cars, camper vans and motorhomes. The camera convinces with its compactness and its easy mounting.
The CMOS image sensor offers high light sensitivity, low picture noise and high image resolution.
The vertically swiveling sensor module allows easy manual adjustment to the desired image capture area.

The large diagonal viewing angle of 170° allows a good overview of the area behind the vehicle, enabling safe backing and parking at all times.

The 10 m long main system cable of the ZE-RVC82MT is equipped with mini 4-PIN connectors to keep the diameter of the cable feed-through hole reasonably small.

The ZE-RVC82MT is compatible with rear view camera monitors, car specific as well as 1-DIN and 2-DIN in-car infotainment systems offering an (RCA) CVBS camera input.

Techn. Specifications

  • Image device: 6.09 mm SONY IMX225LQR CMOS sensor
  • Lens focal length: f 1.8
  • TV system: NTSC / 30 fps
  • View angle: 170° (D) x 135° (H) x 90° (V)
  • Native sensor resolution: 1305 (H) x 977 (V) pixels
  • Resolution of video-out: > 420 TV lines
  • Signal to noise ratio: > 48 dB
  • Light sensitivity: 0.3 Lux
  • Video output: 1.0 Vp-p, 75 ohms CVBS
  • White balance: Auto
  • Backlight compensation: Auto
  • Gamma correction: 0.45
  • Gain control: Auto
  • Sync system: Auto
  • Power supply: DC 6 – 24 V
  • Current consumption: 70 mA @12 VDC, ≤ 480 mW
  • IP protection rating: IP69K
  • Operating temperature: -30° C ~ +75°C, RH 95% max.
  • Dimensions (WxHxD): 44 x 23 x 29 mm

Key Features

  • Compact high resolution universal rear view camera
  • Robust camera housing made of die-cast aluminum
  • Cam sensor with 170° diagonal viewing angle for wide monitoring area behind the vehicle
  • Vertical 140° image section adjustment by rotating sensor roller, 0° to 70° up / 0° to 70° down
  • High sensitivity CMOS sensor with 0.3 lux light sensitivity for good night vision
  • 10 m long separable system cable with mini 4-PIN connectors
  • Required cable feed-through hole: 6.1 mm, easy mounting via M6 hollow thread screw
  • IP69K certified

Mounting Instructions


Icon
ZE-RVC82MT Mounting Instruction EN/DE | 2.5 MB
Download

Icon
ZE-RVC82MT Mounting Instruction EN/DE/FR/IT | 3.9 MB
Download

footer-1110x18