ZE-RCE3704-2S

• Image device Cam1 / Cam2: Pixelplus PC3089
• Image sensor type: 1/3“ / 8.5 mm CMOS sensor
• TV system: NTSC / 60 fps
• View angle Cam1 / Cam2: 50° / 100° horizontal
• Total sensor-die based pixel matrix: 756 (H) x 504 (V) pixels
• Image relevant pixel matrix: 720 (H) x 480 (V) pixels
• Lens focal length: f4.2 / f2.0
• Frame rate: 60 fields/sec.
• Signal to noise ratio: >47 dB
• Dynamic contrast: >62 dB
• Light sensitivity: 0.5 Lux/F1.2/50IRE – 0 Lux with IR-LED ON
• Video output: 1.0 ±0.2 Vp-p, 75 Ω, CVBS
• White balance: Auto
• Backlight compensation: Auto
• Gamma correction: 0.45
• Gain control: Auto
• Sync system: Auto
• Power supply: 12 DCV (6 V – 16 V)
• Current consumption (@12 V DC): 80 mA ±10 mA total for Cam1 + Cam2
• IP protection rating: IP68
• Operating temperature: -20° C ~ +70° C

• Compact high resolution rear view camera for FIAT Ducato III vehicles, incl. Series 8 and other identical type variants
• System design integrating the original Ducato brake light retaining the road use homologation^*1
• Cam1 sensor with 50° and Cam2 sensor with 100° horizontal view angle
• Manual adjustment of vertical image section of Cam2
• IR-LED illumination system with dynamic LDR brightness control for Cam2
• Integrated microphone (Cam2)
• Separable main cable with DOMETIC CAM035 6-pin connectors, suitable for direct connection with factory routed DOMETIC main cable in vehicle
• Plastic injection main housing with stainless steel fixation bolts

^*1The ZE-RCE3704-2S integrates into the original brake light insert of the vehicle. The brake light is not part of the supplied set content.