ZE-RCE3804 – Rear View Camera for FORD Transit

The ZENEC ZE-RCE3804 reversing camera has been designed for FORD Transit based vehicles as of 2019 facelift model year, fitting all vehicles versions which are OE equipped with a 3rd brake light and swing out doors and without optional plastic housing for brake light at the rear. The LED brake light assembly with integrated camera module allows for a simple "plug & play" replacement of the original factory installed brake light.
The camera sensor of the ZE-RCE3804 features a swiveling sensor module for manual adjustment of the desired preferred image capture field. The large diagonal viewing angle of 140° for monitoring the area behind the vehicle allows safe resetting and parking. The deployed CCD sensor offers high resolution, good light sensitivity and an excellent signal-to-noise ratio. 6 IR-LEDs are placed in a circle array around the cam sensor and are controlled by an LDR light element to provide fully automatic twilight and nighttime illumination.
The ZE-RCE3804 has an internal microphone to additionally acoustically monitor the processes behind the vehicle during maneuvering. The 10 m long main system cable of the ZE-RCE3804 comes with screw lock type 4-pin connectors. The ZE-RCE3804 is compatible with reversing cam monitors, 1-DIN and 2-DIN car infotainment devices, moniceivers and naviceivers that offer a (RCA) CVBS camera video input with additional RVC mic audio (RCA) input.

Compatible with
 Model Type Model Year
FORD Transit, all versions* 7th Generation, 2019er Facelift as of 2019

*Commercial vehicles, vans, minibuses and other versions based on 7th Gen vehicle hull structure such as motorhomes with swing out rear doors and 3rd brake light at rear top section. Only for direct mounting, not compatible with vehicles which are equipped with optional brake light plastic housing.
*FORD Transit Custom vehicles cannot be extended directly with the ZE-RCE3804 without modification, as the power supply plug is too long and protrudes on the inside.

Specifications

  • Image device Cam: SHARP RJ2331 CCD sensor (with AA9050)
  • Image sensor type: 1/3“ / 8.5 mm CMOS sensor
  • TV system: NTSC / 30 fps
  • View angle: 140° diagonal
  • Native sensor pixel matrix: 976 (H) x 494 (V)
  • Image relevant resolution: 700 TV lines
  • Lens focal length: 2.6 mm
  • Frame rate: 30 fields/sec., interlaced
  • Signal to noise ratio: > 48 dB
  • Dynamic contrast: > 60 dB
  • Light sensitivity: 30 Lux with IR-LED ON
  • Video output: 1.0 ±0.2 Vp-p, 75 Ω, CVBS
  • White balance: Auto
  • Backlight compensation: Auto
  • Gamma correction: 0.45
  • Gain control: Auto
  • Sync system: Auto
  • Power supply: 12 DCV
  • Current consumption (@12 V DC): 80 mA ±10 mA
  • IP protection rating: IP68
  • Operating temperature: -20° C ~ +70° C

Key Features

  • Compact, high-resolution plug & play reversing camera for replacement of the original 3rd OE brake light assembly, for commercial vehicles, vans and minibuses based on the 7th generation FORD Transit incl. motorhomes and camper vans from 2019 Facelift and up
  • Rugged injection molded red plastic main body with stainless steel clip-on mounting clamps
  • ECE 148R certified brake light assembly (retaining the road homologation approval)
  • Cam sensor with 140° diagonal viewing angle for a wide surveillance area behind the vehicle
  • Manually adjustable vertical image section of the camera sensor with +20° to -20° range to hit individually preferred field of view
  • IR-LED lighting with 6 LEDs and dynamic brightness control via LDR element
  • Integrated microphone for monitoring of environmental sounds via control unit
  • Separable 3-piece system cable of 10 m length with nut secured 4-pin connectors

Mounting Instructions


Icon
ZE-RCE3804 Manual EN/DE | 2.0 MB
Download

Icon
ZE-RCE3804 Manual FR | 1.6 MB
Download

Icon
ZE-RCE3804 Manual IT | 1.6 MB
Download

footer-1110x18