ZE-RCE3703MV – "multi-view" rear view camera for Fiat Ducato III

The ZENEC ZE-RCE3703MV "multi-view" rear view camera has been developed for use with FIAT Ducato III based vehicles and motorhomes in particular. This camera model deploys
high quality parts and materials throughout, to provide reliable operation and appropriate longevity in the target vehicles mentioned. The Pixelplus PC1058C CMOS image sensor offers an image resolution of up to 700 TV lines with high light sensitivity.

The technical standout feature of this reversing camera model is the multi-view display mode. The multi-view function allows direct manual control of the desired image section on the ZENEC device by tapping one of the six camera view modes on the device touchscreen.

When the reverse gear is engaged the ZE-RCE3703MV automatically switches into the image section presenting the area behind the vehicle, for simplified reversing and parking. Other manually selectable image modes serve to monitor the corner area of the vehicle or the traffic situation to the rear while driving (“digital rear-view mirror” function).

The ZE-RCE3703MV is compatible with selected ZENEC device models, compatible with “multi-view” cams.

Techn. Specifications

  • Image device: 1/3” / 8.51 mm Pixelplus PC1058C CMOS sensor
  • Horizontal view angle: 180° (max.) – image areas controllable via ZENEC device
  • TV system: NTSC / 60 fps
  • Effective sensor resolution: 960 (H) x 576 (V) pixels
  • Resolution of video-out signal: 700 TV lines
  • Frame rate: 60 fields/sec.
  • Signal to noise ratio: 43.3 dB
  • Light sensitivity: 1.0 Lux
  • Video output: 1.0 Vp-p (+/-0.2 V), 75 ohms, CVBS
  • Electronic shutter: auto
  • White balance: auto
  • Automatic gain control: auto
  • Backlight compensation: auto
  • Power supply: 5.5 – 12 V DC
  • Current consumption: 825 mW (165±5 mA@5 V via step-down converter)
  • IP protection rating: IP68
  • Operating temperature: -20° C ~ + 70° C

Compatibility


ModelModel TypeModel Year
FIAT Ducato III250/2512006 - 2011
FIAT Ducato III 250/2512011 - 2014
FIAT Ducato III 250/251 (X290) 2014 - 2021
FIAT Ducato IIISeries 82021 - 2023
FIAT Ducato III Series 9as of 2023
CITROËN Jumper II250/250D/250Las of 2006
PEUGEOT Boxer II250/251as of 2006
OPEL MovanoType Cas of 2021
OPEL VauxhallType Cas of 2021

Key Features

  • “Multi-view” reversing camera for FIAT Ducato III vehicles and type variants, for use with selected compatible ZENEC device models
  • System design integrating the original Ducato brake light, retaining the road use homologation
  • Multi-view function, offering six camera image display modes selectable via the touchscreen of the ZENEC device (normal, top-down, panorama, L/R blind-spot, dual-split screen, triple-split screen)
  • High quality CMOS picture sensor with low power consumption
  • Detailed high contrast cam image at twilight and night
  • Mechanically adjustable cam angle, allowing field of view personalization
  • Plastic injection main housing with stainless steel fixation bolts
  • Separable 3-part system cable with 15 m main cable length

Mounting Instructions


Icon
ZE-RCE3703MV Mounting Instruction EN,DE,FR,IT | 5.5 MB
Download

    CAUTION

  • Use the included connection cable exclusively. Modifying the cable will void your warranty.
  • The camera is water- and dustproof and has been licensed according to the international standard IP68. However, vehicle cleaning using high pressure water and steam jet devices may still lead to damage of IP68 rated camera models by intrusion of water.
  • If the motorhome is treated with a water jet high pressure cleaning device, make sure to keep a distance of at least one meter between the water nozzle and the camera sensor / housing.

Image-Mode

footer-1110x18