ZE-RCE4606 – Rear View Camera for utility vehicles from MERCEDES & VW


ZENEC‘s rear view camera ZE-RCE4606 replaces the original third brake light of your MERCEDES Sprinter II, Sprinter III or VW Crafter.
Of course, you don ́t have to do without the third brake light. The ZENEC camera module takes over the original brake light, for simple „Plug & Play“ retrofit connecting to the vehicle-mounted cable.
An integrated microphone and an IR-LED night illumination system are part of the ZE-RCE4606 cam as well.
This product is compatible with a wide variety of 2-DIN A/V receivers of the aftermarket and the ZENEC E>GO product line up, including ZENEC 2-DIN infotainers and naviceivers.

Key Features

  • Compact, high-resolution rear view camera for MERCEDES Sprinter II, Sprinter III and VW Crafter vehicles
  • Easy “Plug & Play“ installation
  • Integrated microphone
  • LDR controlled day / night mode with 6 night vision IR-LEDs
  • Manual adjustment of vertical image section in 3 steps
  • Separable 3-part system cable, with cable lengths of 0.7 m + 15 m + 0.7 m

Technical Specifications


Image device1/3“ / 8.5 mm Sony CCD Sensor
Lens focal lengthf2.6
TV systemNTSC / 60 Hz
View angle120° (D) x 102° (H) x 77° (V)
Native sensor resolution752 (H) x 494 (V) pixels
Resolution of video-out> 600 TV lines
Frame rate60 fields/sec
Signal to noise ratio> 48 dB
Light sensitivity0.1 Lux, 0 Lux if IR on
Video output1.0 Vp-p, 75 ohms CVBS
White balanceAuto
Backlight compensationAuto
Gamma correction0.45
Gain controlAuto
Sync systemAuto
Power supplyDC 12 V
Current consumption150 mA (DC 12 V) / ≤ 1800 mW
IP protection ratingIP68
Operating temperature-20° C ~ +70° C

Mounting Instructions



Compatible to the following vehicles:

Model Type Model Year
MERCEDES Sprinter II W906 2006 > 2018
MERCEDES Sprinter III VS30 2018 >
VW Crafter LT3, 1st Gen 2006 > 2018

footer-1110x18