ZE-MRV70

ZE-MRV70 – Rear View Camera  Monitor

With the high-quality 7“/17.8 cm TFT LCD universal monitor ZE-MRV70 from ZENEC, you can keep an eye on everything at all times. Three cameras can be connected to the monitor (Cinch, CVBS), for example rear view, side or front cameras (PAL/NTSC). The ZE-MRV70 is suitable for all kinds of vehicles with 12 V or 24 V on-board power supply, i.e. for cars and motor homes, but also for vans, trucks and commercial vehicles, such as excavators and construction vehicles or agricultural and forestry machines.

The ZE-MRV70 convinces with a high resolution (1024 x 600 pixels) and its brilliant image reproduction. In combination with the click-on sunshade and automatic display brightness control via an LDR sensor element, optimum readability is ensured even under difficult lighting conditions – providing additional safety when driving and maneuvering.

The monitor can be activated automatically, manually or by remote control. All three camera images can also be switched on automatically via various mechanisms due to the trigger inputs, for example by engaging reverse gear, setting the turn signal or activating working tools on commercial vehicles. A switch-off delay of 1 - 10 seconds can be set for each camera input. Due to the switch-off delay, a reversing camera image, for example, is still displayed for the set time after reverse gear is disengaged; a side camera can also be controlled directly via the turn signal as a turn-off assistant as a result. The image display can be set individually in the menu for each video channel.

The image can be switched between mirrored and normal view. In this way, the correct image is displayed for each camera and each mounting position. For better distance estimation, grid lines can be displayed separately for each camera.

Thanks to the built-in speaker, the ZE-MRV70 can play back audio signals from a camera with microphone (CH1) – with adjustable volume level.

The ZE-MRV70 has a practical mounting foot with adhesive pad and is therefore easy to install. The large contact surface ensures a secure hold. The foot can also be screwed in place, for example for a hanging installation. In order to align the monitor optimally, it can be flexibly rotated and tilted. The monitor is mounted via the universal mounting rail on the back of the housing or via the threaded hole at the bottom. Due to this special design, the ZE-MRV70 can also be mounted with additional suction cup and mounting feet or vehicle-specific mounts (e.g. from Brodit or Arat), which are optionally available in stores.