ZE-RCE3705

Compact, high-resolution rear view camera, specially developed for FIAT Ducato III vehicles and type variants.
The red brake light reflector is not included in the scope of delivery.

Rear View Camera for Fiat Ducato III

Compact, high-resolution rear view camera

Compact, high-resolution rear view camera, specially developed for FIAT Ducato III vehicles and type variants: The ZE-RCE3705 deploys high quality parts and materials, to provide reliable operation and appropriate longevity in the compatible target vehicles. The ZE-RCE3705 offers a large 180° diagonal viewing angle. The camera complies with a great variety of moni- and naviceiver models made for CVBS rear view cam signal input.
ModelModel TypeModel Year
FIAT Ducato III 250, Series 8 / 9 / 2as of 2006
CITROËN Jumper II250, Series 2as of 2006
PEUGEOT Boxer250, Series 2as of 2006
OPEL Movano250, Series 2as of 2021
Toyota Proace Maxas of 2024
  • Image device: 1/2.9 in / 8.76 mm Silicon Optronics JX-F53 CMOS
  • Lens focal length: f 1.6
  • TV system: NTSC / 30 fps
  • View angle: 180° (D) x 160° (H) x 100° (V)
  • Native sensor resolution: 2 Megapixel, 1920 (H) x 1080 (V) pixels (1080p)
  • Resolution of video-out: > 420 TV lines
  • Frame rate: 30 fields/sec.
  • Signal to noise ratio: > 48 dB
  • Light sensitivity: 0.3 Lux
  • Video output: 1.0 Vp-p, 75 ohms CVBS
  • White balance: Auto
  • Backlight compensation: Auto
  • Gamma correction: 0.45
  • Gain control: Auto
  • Sync system: Auto
  • Power supply: DC 6 – 24 V
  • Current consumption: 70 mA @12 V DC, ≤ 840 mW
  • IP protection rating: IP69K
  • Operating temperature: -30° C ~ +75° C, RH 95 % max.
  • Dimensions: 7 x 27 x 6 cm
  • Compact, high-resolution backup camera for FIAT Ducato III vehicles and similar models
  • System design integrates the original brake light (ABE/vehicle registration remains valid)
  • High-quality Silicon Optronics CMOS image sensor with low power consumption
  • Detailed image resolution with high contrast even at dusk
  • 11 m main cable length
  • Mechanically adjustable camera angle for customizing the field of view
  • Main housing made of injection-molded plastic with mounting bolts made of stainless steel

SCOPE OF DELIVERY

  • Camera
  • 2-piece connection cable (main cable length: 11 m)
  • 2 stainless steel mounting bolts (71 mm long)
  • Installation instructions