ZE-RVSC200-MK2 – Twin-Sensor Rear View Camera

The ZENEC ZE-RVSC200-MK2 twin-lens rear view camera was specially developed for semi- and fully-integrated motorhomes. In the upper part of the camera body is the so-called Cam1. The main task of this camera is to replace the not available interior mirror. The camera lens, which is located in the lower part, is called Cam2 and is mainly intended for maneuvering and reversing. Cam2 will record the individually adjustable area of up to 5 meters behind the motorhome. An integrated microphone as well as the IR-LED night illumination system will support the lower camera (Cam2).
This product is compatible with a variety of 2-DIN A/V aftermarket receivers and models of the ZENEC E>GO line up, featuring two inputs for reversing cameras and one for microphone.

Specifications

  • Image device Cam1/Cam2: 6.09 mm SONY IMX225LQR CMOS sensor
  • Lens focal length Cam1/Cam2: f3.5 / f2.3
  • TV system: NTSC / 30 fps
  • View angle CAM1/Cam2: 90°(D)x50°(H)x45°(V) / 130°(D)x95°(H)x75°(V)
  • Native sensor resolution: 1305 (H) x 977 (V) pixels
  • Resolution of video-out: > 420 TV lines
  • Frame rate: 30 fields/sec.
  • Signal to noise ratio: > 48 dB
  • Light sensitivity: 0.3 Lux
  • Video output: 1.0 Vp-p, 75 ohms CVBS
  • White balance: Auto
  • Backlight compensation: Auto
  • Gamma correction: 0.45
  • Gain control: Auto
  • Sync system: Auto
  • Power supply: DC 12 V
  • Current consumption Cam1/Cam2: 70 mA / 100 mA @12VDC, ≤ 2040 mW
  • IP protection rating: IP69K
  • Operating temperature: -30° C ~ +75°C, RH 95 % max.

Key Features

  • Compact twin-sensor rear view camera
  • Fast-mount click-on system for camera main assembly on mounting plate
  • Cam1 sensor with 50° and Cam2 sensor with 95° horizontal view angle
  • Manual adjustment of vertical / horizontal image section for Cam1 / Cam2
  • IR-LED night-illumination system for Cam2 with dynamic LDR brightness control
  • Integrated microphone (Cam2)
  • Separable 3-part system cable with 17.0 m main cable length
  • Adaptor for factory-installed Waeco main cable supplied with the set

Mounting Instructions


Icon
ZE-RVSC200-MK2 Manual EN/DE | 1.9 MB
Download

Icon
ZE-RVSC200-MK2 Manual EN/DE/FR/IT | 3.5 MB
Download

footer-1110x18