Do I need to use P.ANT or configure antenna power somehow?
The Z-N528 features phantom power supply for DAB antennas, which is set to ON as factory default and can be switched ON or OFF individually. The Z-N528 does not come …
I’m using a dual sensor camera, how do I connect it to the Z-N528?
In case of a dual sensor camera with only one 12 V supply, please connect it to the CAMERA1-In port. For dual sensor reversing cameras, a separate accessory GNL-SWV2X1-RCA is …
Is it possible to connect or integrate the Z-N528 with OE steering wheel remote controls?
If your vehicle is equipped with an OE steering wheel remote control it can be connected to the Z-N528. For this purpose, depending on the vehicle brand, model and model …
The use of the integrated Bluetooth solution requires mounting of an external microphone?
Yes, due to the glass type front system design the Z-N528 system features no opening for the microphone. Therefore, the external Bluetooth microphone must be mounted to be able to …
What conditions must be met or considered to allow the installation of the Z-N528?
The Z-N528 is a 2DIN device model which will fit and work with most vehicles featuring an ex works 2DIN radio mounting slot.
In the Setup > System > Password I can´t enter an own theft protection. What I´m doing wrong?
First, the password function must be set to „ON“. Before you can enter your own password, you have to enter the default password – 012345 – once.
When I start the engine of the car my Z-N528 device powers off and reboots again.
ZENEC units include a low-voltage protection to avoid undersupply for certain integrated circuits (ICs) that may not work properly without correct and steady supply voltage. Please consult your car service …