AW: No. The Z-E2014M comes with an integrated high quality hands-free module by Parrot. Any OE installed hands-free devices should be completely shut down, by removing the respective fuse in …
AW: GPS antennas are usually equipped with a standard FAKRA connector that can be connected to the Z-E2014M. However, it is still recommended to install and use the ZENEC GPS …
AW: This ZENEC E>GO device requires ignition to be ON and CAN signals for operational status of device. CAN data is only present in the vehicle, when ignition status is …
AW: The independent vehicle heater system remains controllable over the dedicated aux heater remote control or, for newer systems, via Smartphone App. The ZENEC device does not support time adjustments …
AW: Please make sure that the brown connector on the backside of the Z-E2014M is properly connected to the CAN interface. This wire lead transmits the CAN data between the …
AW: Yes, the device is compatible with factory mounted Dynaudio sound systems. The Fender type sound systems found in some vehicle models such as 2012 Beetle / Passat / Jetta …
AW: The Z-E2014M is set up correctly ex-works, i.e. the antenna phantom power is set to ON. The use of additional external aftermarket antenna Phantom power adaptors is not allowed …
