ZENEC E>GO device cannot be run / turned on when ignition of vehicle is off.
Answer: No, you cannot turn on the ZENEC E>GO device when ignition of vehicle is off. E>GO units are connected to the CAN network of the vehicle they are mounted …
Does the ZE-NC3811D offer steering wheel and driver information display integration?
Answer: Please make sure that the brown connector on the backside of the ZE-NC3811D is properly inserted. This wire lead transmits the CAN data between the interface to the ZE-NC3811D. …
Do the park sensors still work after mounting the ZE-NC3811D?
Answer: Yes, the park sensors and the beep warnings continue to work on the vehicle types as shown in the compatibility list – but not for the new Ford Mondeo’13 …
What conditions must be met to install the ZE-NC4612?
AW: The physical shape of the OE radio or navigation must be identical with the ZE-NC4612. Mercedes-Benz A-Class (W169) and B-Class (W245) models equipped with OE Radio 5 or radio-ready …
Is the Convers+ supported?
Answer: No, the Convers+ is not supported.
What conditions must be met, to install the ZE-NC3811D unit?
Answer: The vehicle must be equipped with the „OE radio prearrangement“ from the factory, to allow straightforward installation of the ZE-NC3811D. The physical appearance of the OE installed radio must …
In the anti-theft menu, I cannot enter an individual code. What’s wrong?
AW: A default code – 0000 – needs to be entered first. After this has been completed, the device will accept any other individual code combination.