Content on USB data carrier is not recognized even after successful formatting?
It may happen that the file system of the disk got damaged, or that the file allocation table of a data carrier is defect due to erroneous write cycles. There …
It may happen that the file system of the disk got damaged, or that the file allocation table of a data carrier is defect due to erroneous write cycles. There …
AW: Make sure your USB data carrier has been formatted in FAT32 – prior to use. Zenec recommends the use of high quality USB sticks only. Study the corresponding key …
AW: It may happen, depending on the assignment of USB memory devices connected to the USB hub, that the media drive indicator does change the address of drives assigned before, …
AW: The microSD card reader on the front side of the Z-N720MH device is reserved for the navigation SD-card operation and data retrieval exclusively. Avoid removing the microSD card from …
AW: To protect the device electronics from under voltage conditions and resulting malfunction of function modules inside the device the ZENEC mainboard and the MCU constantly measure the power supply …
Answer: Please take into account that we use, for entire Western Europe and standard, non motorhome devices, maps from the market leader TELE Atlas. It happens that, at a few …
AW: With the traffic messaging channel the navigation unit is able to receive traffic jam information. Thus, navigation can calculate by-passes in real time. This function is activated ex works. …