What conditions must be met to install the Z-E2014M?
AW: The physical shape of the OE radio or navigation must be identical with the Z-E2014M. The Z-E2014M features a single FM tuner. That means that vehicles fitted with dual …
What do I need to consider for audio playback from USB source?
Answer: Make sure your USB data carrier has been formatted in FAT32 – prior to use. Zenec recommends the use of high quality USB sticks only. Study the corresponding key …
Content on USB / SD data carrier is not recognized even after successful formatting?
AW: It may happen that the file system of the disk got damaged, or that the file allocation table of a data carrier is defect due to erroneous write cycles. …
The USB hub keeps changing the drive indication?
AW: It may happen, depending on the assignment of USB memory devices connected to the USB hub, that the media drive indicator does change the address of drives assigned before, …
What should I consider when using SD cards?
AW: The SD card reader on the front side of the Z-E7015S device is reserved for use by the navigation SD-card exclusively. Avoid removing the SD card from the device, …
Why does the Z-E7015S reboot, when I start the engine of my car?
Answer: To protect the device electronics from under voltage conditions and resulting malfunction of function modules inside the device the ZENEC mainboard and the MCU constantly measure the power supply …
My ZENEC device navigates incorrectly. Some streets aren’t even shown on the device.
Answer: Please take into account that we use, for entire Western Europe and standard, non motorhome devices, maps from the market leader TELE Atlas. It happens that, at a few …